The thermal oil boiler takes heat conduction oil as heat carrier and uses circulating oil pump to force liquid circulation. The thermal oil boilers supplier is experienced in the production of the direct flow special industrial furnace which will be reheated after transferring the heat to the thermal equipment. Gas fired organic heat carrier boilers are widely used in petrochemical, textile, printing and dyeing, plastic, rubber, food processing, wood processing, asphalt heating, carton production, vegetable dehydration, paint baking, casting sand mold drying and so on. It can also be used for baking, steaming, shaping, melting and drying at ≤ 350oC.

Thermal oil boilers supplier

This series of industrial thermal oil boiler is assembled type forced circulation boiler. The heating surface of this series boiler body is compact in structure. The heating surface is composed of inner and outer discs, the inner coil is the radiation heating surface, and the outer coil and the outer surface of the inner coil constitute the convection heating surface. The boiler consists of the upper body and the lower combustion chamber, which are combined on site. After full combustion in the combustion chamber, most of the heat is absorbed by the radiant heating surface, and the high-temperature flue gas enters the convective heating surface for heat exchange. After getting out of the boiler, the air needed for boiler combustion is heated in the air preheater, and then the flue gas is sent to the chimney and discharged into the atmosphere through the dust collector by the induced draft fan.

Thermal oil boilers supplier strong technical force, easy installation, as long as the upper body and the lower combustion chamber are closed, the installation cycle is short. The heating surface adopts the compact disk pipe, and the heating surface is adequately arranged to reduce the heat load on the pipe surface, so that the thermal oil can be used more safely. The medium flow is reasonable, the thermal conductivity oil field is low (import) to (export), the gas generated in the operation, better improves the thermal efficiency of the boiler.

The fuel of the industrial organic heat carrier boiler is burned adiabatically in the combustion chamber, which can make the combustion easier and more complete, and improve the thermal efficiency of the passing way. The top of the boiler is arranged with dense coils, which can better protect the top of the furnace and avoid the phenomenon of top burning out. The heat-conducting oil boiler adopts the structure of three-return circular tube and is equipped with advanced combustion equipment. The boiler is fully automated.

After the fuel of YY(Q)W series gas fired industrial boiler is ignited by the burner, the torch formed is filled in the disk tube and transmits radiant heat through the wall of the coil, which is the first return journey. The high temperature flue gas generated by combustion converged at the rear door, and turned into the second return journey, namely the convective tube bundle area. After convection heat transfer, the flue gas temperature gradually decreased to the front door, and then turned into the third return journey tube bundle area, and then entered the chimney and discharged into the atmosphere through the energy saver.

YY(Q)W series organic heat carrier furnace

The thermal efficiency of YY(Q)W series gas fired thermal oil boiler is more than 5% higher than that of conventional thermal oil boiler. Our company can also customize the flue gas waste heat recovery system for you, and the boiler room layout plan will save you more worry and money. Thermal oil boilers supplier have rich production experience, high degree of automation of manufacturing equipment, complete detection means. Welcome everyone to come to consult purchasing, Zozen Boilers will serve you wholeheartedly.