The SZS boiler adopts the design of the double-drum vertical D-type arrangement, and the stress condition of the boiler body under pressure is good. Important pressure components such as the drum are not directly radiated and washed by the high temperature flame, and the pressure components can expand and contract freely with small thermal stress, […]

The two sides of the furnace of the SZL type coal-fired boiler adopt a membrane water-cooled wall structure, which not only improves the sealing performance of the boiler, but also increases the volume and heating surface of the furnace. What’s better is that the front and rear walls are arranged with secondary air (controlled by […]

The combustion process of biomass thermal oil boiler is simple, convenient and easy to operate. The fuel is fed into the furnace by the screw feeder, where it is gradually preheated, dried, ignited and burned due to the action of high temperature flue gas and primary air. During this process, a large amount of volatile […]

The oil-fired thermal oil furnace is easy to install, the burner has high thermal efficiency, and the installation period of the thermal oil furnace is short. The heating surface of YQW-350YQ thermal oil furnace adopts densely arranged circular tubes, and the heating surface is arranged adequately. Effectively reduce the heat load on the surface of […]

Biomass fired boilers there are rows of water-cooled wall tubes on the left and right sides of the furnace, and two sets of tube bundles are arranged in the drum to form two return trips. This type of boiler has sufficient heating surface and is equipped with a tail heating surface economizer. The chain grate […]

Due to the efficient and continuous heating capacity of boilers, they are widely used in all walks of life, improving production efficiency, including garment factories. So under what circumstances will a garment factory use a boiler? Which boiler is more suitable to use? Now let’s uncover the secrets of the boiler in the garment factory! […]

Oil-fired boilers refer to boilers that use oil for fuel, including boilers with diesel, light oil and other oil. The overall layout of the oil-fired boiler is similar to that of the coal-fired boiler, except that the bottom of the oil-fired boiler furnace is mostly made of an insulating furnace bottom inclined 10° to 30° […]

WNS8-1.25-Y(Q) boiler is a horizontal wet-back three-pass gas boiler. The main pressure components of the main body are tube plate, furnace bladder, back combustion chamber and threaded smoke pipe. In the furnace design of the horizontal 8ton gas boiler, a corrugated furnace is used. When designing the furnace diameter and length, fully consider the matching […]

Gas steam boiler is a horizontal internal combustion boiler, mainly light oil, natural gas, city gas and so on as fuel. WNS 4 tons gas boiler internal wet back combustion design. The flue gas is returned three times in the furnace, and a threaded pipe is used as a heat transfer tube. Heat transfer tubes […]