The working principle of the steam boiler, the heating equipment (burner) releases heat, first absorbed by the water wall through radiant heat transfer, the water of the water wall is boiled and vaporized, and a large amount of steam is generated into the steam drum for steam-water separation (except for the DC furnace), and the […]

Doing a good job of water quality is one of the important links to ensure the safe and economic operation of boilers. Because the combustion temperature of oil and gas is high. Most of the fuel and gas boilers (especially imported fuel gas boilers) are small in size and compact in structure, and have high […]

Features Advanced Structure The integrated structure is a newly designed structure which applies on steam boiler. Compared with the tradition split three pass wet back structure, this boiler takes less area and makes better performance. High Efficiency This steam boiler has a waste heat using method and that makes the thermal efficiency can be as […]

Advanced submerged arc automatic welding technology is adopted for main welding seams to ensure welding quality. All major welds are 100% radiographically inspected according to the requirements of the steam boiler safety technical supervision according to the II pole certification standard. The main body of the steam boiler adopts a horizontal internal combustion full wet […]

Lean fuel Gas fired ( BFG/PG/Tail gas ) steam boiler ; Capacities: 1 TPH to 32 TPH ; Pressures: 10.54 / 17.5 2 tph -8 tph Biomass fuel boiler – Delle Furnaces 2 x 6 MW steam Turbines and a 100 tph boiler biomass boiler biomass fired chain grate boiler boiler biogas fired boiler chain […]

Part 1:General introduction 1. Boiler capacity:1 ton to 40 ton 2.Stem pressure:1.0Mpa(10bar),1.25Mpa(13bar), 1.6Mpa(16bar), 2.5Mpa(25bar) 3.Steam temperature output:184C,194C,204C,225C. 4.Suitale fuel: biomass, wood pellet,peanut, paddy, rice husk, solid fuel,etc 5.Structure: water tube, big cyclone room 6. Application:food industry, chemical industry, textile industry, garment industry, Pharmaceutical industry,dyeing industry,beverage industry,paper industry,rice mill,etc. II.Part two:Boiler advantages 1. National Scientific and […]

1, three furnace structure The fuel is rapidly cracked in a high-temperature furnace, a part is directly burned, a part is cracked and gasified, and gasified into a combustible mixed gas into the medium-temperature furnace. After the secondary oxygen is fully burned, it enters the low-temperature furnace, and after special treatment and three oxygen-filled combustion, […]

Advanced submerged arc automatic welding technology is adopted for main welding seams to ensure welding quality. All major welds are 100% radiographically inspected according to the requirements of the steam boiler safety technical supervision according to the II pole certification standard. The main body of the steam boiler adopts a horizontal internal combustion full wet […]

2 ton steam boiler Basic introduction: The WNS type oil fired gas (methanol) boiler is a horizontal fast installed three way fire tube steam boiler with internal combustion. The wet back structure of the bias furnace is adopted. The high-temperature flue gas successively washes the second and third way flue gas pipes, and then the […]