Product Thermal Capacity:1400-29000 KW

Working Pressure: 0.8-1.0 MPA

Available Fuel: Bituminous coal, anthracite, biomass particles

Available Industries: Chemical,high temperature heating technology for fertilizer, melamine, alumina and so on

Coal/Biomass Fired Thermal Fluid Heater Advantages

Digitized manufacture

1. The laying-off of steel tube adopts CNC 3D laser cutting machine.
2. The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
3. The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Full argon arc welding

YLW series thermal fuid heater adopt square coil tube and coil tube all adopt argon arc welding technique,which guarantees tubes are 100% qualified.

Long life span

1. The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
2. Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
3. Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Easy operation

1. We have combustion arch patent, which is available for different types of coals, even the anthracite is very easy to burn.
2. Flame-proof feeding bucket can avoid the feeding bucket is burnt and coking.
3. There is ash cleaning unit, which is easy for maintaining, operating and cleaning.

Less fuel consumption

1. Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
2. Furnace adopts double close line coil, which makes heating surface sufficient.